DREAMS HouseBeautiful Grove Bed, Manual

Page: 11 / 20

Push x2 Mattress Stoppers (K) into metal frame, they should go all the
way through the upper & lower metal sections.
NOTE: Before moving the slat frame, place the mattress on the slats. Without a mattress in place, the speed of
movementis quick and may cause injury. Carefully lower the frame with the hand-strap ensuring the frame sides
are aligned with theside panels; there should be an even gap on each side. If not aligned, check bed is still square
(see Step 2) and if it is, butgaps are still not even, re -align as in Step 8.
Depending on the weight of the mattress, the rising speed will vary so be careful until you get used to the speed.
Alwaysuse the strap to lift or lower the frame - keep fingers well away from the moving parts.
When fully assembled and the mattress in position, please raise & lower the ottoman 4/5 times to
ensure the gas pistons are fully lubricated.
!
K
Ottoman assembly
Use pack 'B'
Grove Bed - Assembly Guide - Page 11
10