Dreamotion Frameset Series, Owner'S Manual, Page: 5 / 9

06
07
2.
1.
Install the assembled headboard brackets
with washer(d10D30t2) and hex socket
button head screws(M10×25) onto the
end of head frame.
1.
M8 Lock Nuts
x2
Hex Head Bolt
(M8×20)
x2
Install headboard brackets with socket screw wrench and simple open end wrench.
Assemble the zero clearance accessories as the picture shows.
Headboard Brackets
Mount
x1
T-channel Assy
x1 x4
Washer
(d8.5D17t1.2)
Assy Tube
x1
R-clip
x1
Hinge Pin
x1
Fixed Seat
x1 x2
Bushing
2.
Assemble the zero clearance accessories as the picture shows.
Installation Guide (headboard bracket)
Installation Guide (zero clearance)
Assemble the L-Plate as show in the figure.
Repeat the step on the opposite side.
Installation Guide(stabilizer bracket)
1.
L-Plate
M8 Lock Nuts
x1 x1 x2 x1
Assemble theTie Plate as show in the figure,
properly adjust the position and tighten it.
Repeat the step on the opposite side.
2.
Tie Plate
Hex Head Bolt
(M8×30)
Washer
(d8.5D17t1.2)
x2 x2 x1
fig.1-1 fig.1-2
Hex Head Bolt
(M8×35)
Washer
(d8.5D17t1.2)
fig.2-1
fig.2-2