background image

© 2002-2006 DreamLine™. All Rights Reserved 

 

Victoria/DLG-65 

4

21.

 

The right stationary glass comes with left side framed in the profile. The metal profile fits over the post. 

Clean the tray surface, apply a layer of silicone and insert the other side of the glass into the side metal 

profile (Step 36).

 

22.

 

Tighten the connection of the metal frame and the guide rails. Snatch the post and the frame of the 

stationary glass together (Step 37).

 

23.

 

Secure the top and bottom guide rails to the side metal profile making sure the screws go into the 

designated threaded slots inside the guide rails. Apply some silicone into the connection between the guide 

rail and the side metal profile (Step 38-40).

 

24.

 

Fix the mirror with the screws and screw cover set (Step 41).

 

25.

 

Secure the glass shampoo shelf on the acrylic back wall (Step 42).

 

26.

 

Fasten the rubber door stoppers in places (Step 43-44).

 

27.

 

Attach the handles.

 

28.

 

Place the roof and fasten it with bolts, apply some silicone on the edges to seal the seams.

 

29.

 

Check the door alignment and smooth operation by adjusting the door rollers (Step 45).

 

30.

 

Seal the connecting joints and seams with silicone as shown ton the pictures (46-52).

 

NOTE: 

 

Allow 24 hours for the silicone to set before testing or using the shower.  

 

NOTE:  Improper application of silicone sealant may cause your shower to leak. 

Notes: Our products are subject to modification without further notice. 

Step 1 

Step 2 

 

Step 3 

 

Step 4 

Step 5 

Step 6 

Summary of Contents for Victoria









Reviews: