Dreamline UNIDOOR Style C, Installation Instructions Manual

Page: 37 / 43

INLINE PANEL - Style C shower panel manual Ver 1 01/2018
10
©2018 DreamLine. All Rights Reserved
Use Caution not to pull the Glass Profile (#10) off of the Panel Glass (#11).
!
Fig 5
Fig 6
inside
panel glass
Door
1/16"-1/8"
inside
inside
inside
inside
align the panel glass
with the door glass
Ø5/16"
(8mm)
inside
inside
1
1 2 3 4 5
3 4
5
2
D
OOR
D
OOR
P
ANEL
P
ANEL
P
ANEL
!
The two-piece wall profile
system (consisting of the glass
profiles and wall profiles) will
allow for overall width and/or
out-of-plumb adjustment
within the model size.
See page 6 for details.
5.
Close the Door and align the Panel Glass (#11) with the
Door Glass.
Use the reference mark on the threshold (from
Step #1 ) to confirm that the Door is perpendicular to the
wall. If needed, adjust the position of the Panel Glass
(#11) so that the Anti-Water Strip (inline) (#19) makes
contact with the Door Glass from top to bottom and
creates a seal.
◾ Mark the wall along the inner edge of the Wall Profile
(#09) .
◾ Mark the drilling hole onto the threshold through the
hole in the Bottom Bracket (#18) . (Fig. 5)
6.
Remove the Wall Profile (#09) from the Glass Profile (#10)/Panel Glass (#11) assembly.
Place the Wall Profile (#09) back onto the outlined position on the wall and mark the holes
for drilling through the predrilled holes in the Wall Profile (#09) .
Drill the holes in the wall using a Ø5/16” drill bit and insert the Wall Anchors (#13) .
Apply silicone along the back of the Wall Profile (#09) and around the holes on the wall.
Fasten the Wall Profile (#09) to the wall with the Truss Head Screw ST4.2×40 (#15) . (Fig 6)