background image

Rev.1.1 

10

Product Maintenance 

 

1. The tempered glass can be cleaned with nonabrasive bathroom cleaner or any glass 

r shower door are durable and resistant to the water damage. 

. Maintenance of wheel: 

little lubricating oil to keep it smooth and long last. 

 time, you 

                  

 
 

cleaner you use elsewhere in your home. Rinse off any glass cleaner that gets on the 
aluminum as soon as possible to avoid damage to the anodized surface. Avoid striking 

glass with any sharp or hard objects. Such damage can cause either immediate or delayed 
breakage of tempered glass. 
 

. The aluminum parts of you

2
It is advisable, but not necessary to wipe it with your towel after using the shower. Clean it 
as often as needed to keep the buildup off. Never use any type of abrasive cleaner. Use 

only a soft damp cloth and nonabrasive bathroom cleaners. 
 

3
A: for plastic wheel, use a 
B: for metal wheel, except adding of oil, if shower has not been used for a long

can dry the wheel and put a little grease to keep it well working conditions.                        

 

C: Adjust wheel screw periodically to guarantee moving door effective bearing and sliding. 

 

 

 
 

 
 
 

 
 

 
 
 

 
 
 

 
 

 
 
 

 
 
 

 
 

 
 
 

 
 

Summary of Contents for TORERO












Reviews: