© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
©2018 DreamLine. All Rights Reserved
13
QUATRA PLUS Shower Enclosure Manual Ver 1 10/2018
!
!
1
2
outside
inside
Fig 9a
Install the hinges flush
with the edge of the
Hinge Panel Glass
hinge panel
glass
hinge panel
2mm hinge
gasket
NOTE:
Do Not
attach the
handle to the door glass until
instructed.
Do Not
attempt to lift the door
glass with the handle as this
may result in damage to the
glass and/or serious personal
injury. Use a professional grade
glass suction cup and an
assistant when handling heavy
glass.
NOTE: These adjustable hinges are factory set to overclose.
See
Page 18
for instructions regarding the adjustment features of these hinges.
hinge panel
door
Use caution when installing the
door glass.
DO NOT
make
contact with the edge of the
return panel glass.
TIP:
Set the door glass upon a pair
of wood or plastic shims (13/16” thick)
to make the installation of the door
glass onto the hinges easier.
Fig 9
!
9.
Attach the
Hinges (#06)
to the
Hinge Panel Glass (#01)
(with the bolts facing inside the shower).
Use at least one gasket per side. Make sure that the hinges are flush to the edge of the glass and level.
Carefully bring the
Door Glass (#02)
into the shower between the two stationary panels.
Level up the
Door Glass (#02)
next to the
Hinge Panel Glass (#01)
and fasten the hinges onto the
Door Glass (#02).
Make sure the top edges of the
Door Glass (#02)
and both
Glass Panels
are flush
and level.
(Fig 9 and Fig 9a)
