Dreamland R6705, Instructions For Use Manual, Page: 9 / 12

8
EN
STORING THE HEATING PAD
Store this appliance as follows when not used:
• Wait for the heating pad to be completely dry if previously washed.
• It is recommended to place the heating pad in the package provided
upon purchase for better storage.
• When storing the appliance, allow it to cool down before folding.
• Store the heating pad in a dry place.
Examine the appliance and its supply cord frequently for signs
of wear or damage. lf there are such signs or in the case of
malfunction, contact an authorised technical service centre.
TROUBLESHOOTING
This chapter describes the most common problems that can arise using
the appliance. If the problems cannot be solved with the information below,
please contact the Authorised Service Centre.
Problem Solution
The LEDs on the control unit do not light
up.
Check that the control unit plug is fully inserted in the socket. If the
LEDs remain off, remove the control unit plug from the socket and
return the underblanket to an authorised technical service centre.
The blue warning light is flashing.
Turn the control unit off and remove the plug from the socket. Check
that the control unit connector (5) is fully inserted in the heating pad
connector (6) and reinsert the plug in the socket. If the standby LED
continues to flash, return the heating pad to an authorised technical
service centre.
Temperature LED 1 (1) is flashing.
Return the heating pad to an authorised technical service centre to
be checked.
The product has been used incorrectly or
is damaged.
The power cable or another internal wire
is damaged.
The control unit is damaged.
There are holes or tears in the fabric or
stubborn creases that do not spread out.
MI004052_R6705-07.indd 8 MI004052_R6705-07.indd 8 03/01/22 10:04 03/01/22 10:04