GB
6
Do not iron
STRETCHING
1. The underblanket must be stretched back to approximately its original size during the
drying process. This is best done whilst damp, working from side to side, stretching a
strip at a time. This procedure may need to be repeated a few times until fully dry.
2. Inspect the blanket to ensure that none of the wires have formed into loops, or become twisted
back on themselves. Holding the blanket up to the light will make it easier to inspect the wires.
3. If any problems with the wires persist after the stretching process, or the blanket does
not return to close to its original size, return it along with the control to our Service Centre
for a safety inspection.
STORAGE
When not in use store as follows:
ATTENTION!
When storing the appliance, allow it to cool down before folding.
ATTENTION!
Avoid creasing the appliance.
ATTENTION!
Do not place heavy items on the blanket when in storage, as deep
creases or folds may damage the wiring.
ATTENTION!
Do not use any moth proofing chemicals.
TROUBLE SHOOTING
These appliances are built to the very highest of standards. There are no user serviceable
parts. Follow the solutions if the unit fails to operate.
Problem
Solution
The light fails to illuminate
on the control
Check the switch is attached and that the instructions have
been followed correctly
Check fuse has not blown
Check mains supply is functional
Check that the blanket control is “ON”
Discontinue use and return it to our Service Centre for a safety
inspection.
