gB
4
Temperature laboratory tested following EN60335-2-17
* As set by the lasted European standards (EN60335-2-17 the max temp. for all night use cannot be higher than 37°C).
** The Temperature may very of ±10%.
• Connect the control connector into the blanket socket then plug into the mains supply.
See the Diagrams A & B.
• Switch on your the electric blanket, from the back of the control (8) see Diagram [C], by
positioning the switch ON ( I ) the temperature setting (6) Diagram [C] will default to the
last one used, providing it has been set to that number for a period longer than 8 minutes.
set Fast Preheat: Press temperature button (6) Diagram [C] until number 6 is showing
on temperature display, this will show red. Never use on Fast Pre-heat setting 6 whilst in
bed. (Switch off or to a lower temperature setting , before getting into a bed).
set aLL night use: Press temperature button (6) Diagram [C] until your preferred temperature
setting 1-5 is showing on temperature display (3), this will show with an orange glow.
auto oFF Function: The blanket is fitted with an AUTOMATIC SHUT OFF timer which you
have the choice to select either 1 or 9 hours.
set timer: Push timer button (5) Diagram [C] until either 1h or 9h is showing with a green light
(4) Diagram [C].
automatic timer oFF: When the set time period has elapsed the blanket will be switched off and
the blue indicator light (7) Diagram [C] will show. The blue light may flash after the set time period has
elapsed, providing it works normally when switched off then back on again, the blanket can be continued
to be used. Once the control has automatically switched off, to switch the blanket on again you will need
to reset by first switching OFF (O) at the back and then switch ON again (I) (8) Diagram [C].
manuaL switch oFF Both BLanKet anD controL: Switch (8) Diagram [C] to off (O) position.
memory Function: After using your blanket for over 8 minutes, the intelliheat control will keep in
memory your last temperature setting.
Disconnect: To disconnect your electric blanket from the mains, switch the control to OFF position
(O) (8) (Diagram [C]), and then safely disconnect the plug from the main socket (Diagram [A]).
CLEANING AND MAINTENANCE
WASHING INSTRUCTIONS
The Sleepwell intelliheat mattress cover is suitable for washing.
WASHING
1. Prior to washing disconnect the control lead from the blanket, as in Diagram [B].
2. Before washing the mattress cover it is
essential
that you measure it, to ensure that
it is stretched to approximately its original size during the drying process.
