Dreamer Design Verve SPT, Instruction Manual

Page: 7 / 11

To remove the sun canopy you will need a
Phillips screwdriver to remove the screws
from both sides of the canopy. Unsnap the
canopy from the back and lift it out.
Before washing the canopy, remove the frame.
The canopy may be washed in cold water with
mild detergent. Place the canopy back on the
stroller to dry.
b u b b l e s u n c a n o p y
™
s e a t
The seat is removed by undoing the velcro
and the straps from the foot plate and the
frame. The seat also needs to be unsnapped
from the frame.
The seat may be washed in cold water with
mild detergent. Snap the seat back on the
frame to dry, to prevent mildewing.
unscrew here
It may be snug, but it will lift out.
When the canopy is wet, extend it fully until
completely dry to prevent any mildew from forming.
velcro straps