C
A
D
B
F
E
A. Lock Body
B. Lock Cover
C. Cable
D. Cable Bracket
E. Cable Bracket Cover
F. Cable Head
G. Key
H. Screws x 4
H
G
1. Using a tape measure to ensure the window will only open a maximum of 10cm/4in,
work out the best position to install the Breezz-Safe
®
.
Note: Depending on your window style and the Breezz-Safe
®
installation position, check for the
window opening distance in all directions. Confirm the window will not open more than a total
of 10cm/4in at the widest point.
2. Having worked out the position you
require the Lock Body (A) to be
installed, secure it to the fixed
frame using the Screws (H).
The Lock Body (A) may be fitted
either vertically or horizontally.
3. Hold the Cable Bracket (D) on the
open window frame and position it
to ensure the window will not open
any further than 10cm/4in at the
widest opening. The Lock Body (A)
and the Cable Bracket (D) do not
need to be installed on the same
level, it is important the opening
distance of the window is not
compromised.
4. Using the Screws (H), secure the Lock Body (A) and
Cable Bracket (D) to the window.
7. Slide the Covers (B,E) onto Lock Body (A)
and Cable Bracket (D) and click into place.
6. Test the function by locking
and unlocking using Key (G).
2
3
4in
4in
10cm
10cm
4in
4in
10cm
10cm
10cm
10cm
4in
4in
10cm
10cm
4in
4in
10cm
10cm
10cm
10cm
4in
4in
4in
4in
10cm
10cm
4in
4in
WARNING:
This package contains small parts and sharp points in an unassembled state.
Keep out of reach of children. Adult assembly required.
TO INSTALL:
PARTS LIST:
5. Insert the Cable Head (F) into the
Lock Body (A), then using Key (G),
lock the Cable Head (F) into place.
Check measurement
of opening do not
exceed 10cm/4in.
(If too wide, reposition
and reinstall.)
