Assembly:
1) Mounting the ceiling plate
-Assemble the flat plate (item 1) with the ceiling support (item 2) as described in fig. A.
-Align the support (item 2) perpendicularly to the screen before tightening the fixing wing
nut (item6)
-Assemble the two round head screws (item 5) with the ceiling support (fig. B).
2) Positioning the ceiling plate
-Use the flat ceiling plate as a template to mark the drill holes on the ceiling (fig. C)
-Make sure that the plate is mounted firmly to the ceiling.
3) Mounting the projector plate
-Place the projector mounting plate (item 3) against the projector and screw the four bolts
8 x 30 mm (item 4) firmly (fig. D)
4) Attaching the projector to the ceiling plate
-Align the hook-shaped mount with the ceiling plate and verify that the lock washers are
not tightened (fig. E)
-Hook the projector to the ceiling plate and adjust the projector to the desired angle before
tightening the safety round head screws (fig. F)
NB: DreamVision accepts no liability for damages caused by incorrect assembly or
by improper use.
