- 22 -
23. Transponder
Edit
Press the MENU-Button to enter the OSD-Mainmenu.
Go to Setup -> Service Searching -> Transponder Edit.
This Menu keeps all known satellites the Dreambox
scans for. If you recognize a missing satellite, add
or edit the satellite.
Pressing the OK-Button on the sat-button, enters
the Satellite Edit Menu.
Pressing the OK-Button on the add-button, adds a
new frequency to the selected satellite.
Pressing the OK-Button on the edit-button, edits the
Transponder Values for the selected satellite.
Pressing the OK-Button on the remove-button,
removes a transponder frequency from the selected
satellite.
Pressing the green Option-Button adds a new
satellite.
Pressing the red Option-Button deletes a satellite.
Follow the Instructions on the Statusbar.
Network search
:
The NIT holds the Information about the Satellites
and the TV/Radio- Programs.
(NIT = Network Information Table)
Extended network search
:
Set a check to scan the NIT from other
Transponders
Skip known Networks
:
Unchecking this, decreases the satscan. The NIT
will not be used.
Use BAT
:
Bouquet Tables of the Provider will be used, if
available.
(BAT = Bouquet Association Table)
Press the green Option-Button to save.
