13
SKIMMER FILTER CLEANING OR REPLACEMENT OF THE FILTER
CARTRIDGE
The spa’s automatic surface skimmer filter is designed to remove floating debris and contaminants, such as
body lotions, by drawing water through a specially formulated filter cartridge element. It is critical that this
element be routinely cleaned.
To Clean or Replace the Filter Cartridge
1.
Never operate the spa without the filter cartridge in place. It is difficult to remove the filter
cartridge while the water is flowing. Also, there is a risk that debris may be draw into the plumbing
system and damage the pump. Place system on Standby Mode (page 11) or disconnect power.
2.
Remove the end nut by turning it counter clockwise.
3.
Pull the filter cartridge straight up and out of the skimmer filter.
4.
At this point you can install a new filter cartridge and proceed to the next step. To clean the filter
cartridge, take it to an area where the run off drains to a sewer drain capable of safely assimilating
the water which may contain both unsanitary contaminants and chemical residue. Thoroughly rinse
with the high pressure from a garden hose until the filter cartridge is free of dirt and debris.
5.
Return the cartridge to the filter well by following steps 1- 4 in reverse order.
End nut
End nut
Filter
cartridge
Filter
cartridge