OSC1:
Controls Oscillator 1. Best operated at 1V/Oct. Max +/-12V
OSC2:
Controls Oscillator 2. Best operated at 1V/Oct. Max +/-12V
VCF:
Controls the filter’s Cutoff. Best operated at +/-5V. Max +/-12V
CV:
Controls both oscillators at the same time.
Best operated at 1V/Oct. Max +/-12V
ECHO:
Controls the echo’s time. Best operated at 0-2,5V. Max +/-5V
GATE:
Controls the envelope’s on-off. The EREBUS gate is different
from common gate controls because the ADSR envelope works in
an on/off function but the amp’s envelope has a logarithmic
opening function.
LFO/R:
Controls the rate of the LFO.
Works best at +/-5V and a/-10V
PW:
Controls the pulse width of the Osc1 square wave.
Works best at +/-5V and a/-10V
VCA:
Controls the amplitude modulation of the Amp.
Works best at +/-5V and accepts max +/-10V
OUT:
Master Output of the synthesizer.
It can also be connected with headphones.
IN:
Mono input to the Filter. If the synth is not triggered, the sound
will not pass through.
MIDI:
Midi input. Use only the type-A dedicated adapter included in the box
B. INPUTS
B. MIDI INTERFACE
2.10 Eurorack
In order to use the Hades Reissue in a eurorack case, do the following:
A. Unscrew the 4 corner bolts, which keep the module attached to the case
B. Remove the module from the case. Afterwards, unscrew the 2 bolts that connect the small PCB to
the USB adapter and detach them.
C. Plug the provided ribbon cable and connect it to the power bus board of a eurorack case.
