2012-12-05
www.DRCmall.com
www.DynamicRC.com
6
Position of Joystick
JJIFA-IR4TX
Stick 3
Throttle
Aileron
Elevator
Rudder
Stick 4
Throttle
Rudder
Elevator
Aileron
• The stick which is not being centered is assigned to throttle control .
• position of throttle stick should be decided at PCB assembly.
(
Attention
) we recommend to put
JS2
on the right side of PCB for
throttle stick .
If you want JS1 assign to throttle , you need to change harness wire.
If you don’t want change wire , you may
CUT PCB center line
and
switch its position .
