DRC Techno J.SECURE +, User Manual

Page: 21 / 30

P a g e | 20
SOFTWARE ERROR MESSAGES
Sr.No MESSAGE Probable Reason
1
Remove Bangle Attachment/Change Prop Selection
This message is shown when
the bangle Scan Attachment is
connected and Necklace/Ring
setting is chosen for scan
process
2
Add Bangle Attachment/Change Prop Selection
This message is shown when
the bangle Scan Attachment is
not connected and Bangle
setting is chosen for scan
process
3
Close the Door
This error message is to alert
the user to close the door
before scan process started
4
Process Is Running Please Wait Some Time
Alert message shown when
scan is in process and user
tries to interact with the s/w
buttons
5
Software key Does Not Exists
S/w to run requires a unique
USB Software key and this
message is shown when this
key is not connected to
machine
6
Invalid version
If there is mismatch in the
version of s/w
7
Tray not locked
This error message is to alert
the user to lock the tray before
scan process started
8
Software Failed To Initialise
This message occurs when the
hardware of the machine
malfunction or does not
responds