5
9. Press the "Cycle Start" button. The timer will count down until warming is complete.
10. The warming cycle is complete when the unit beeps.
There is a one minute cooldown period between when the timer hits 0:00 and
when the unit beeps. This allows for the bottle to cool slightly before removal.
Take care when opening the lid as there may be some residual steam. Allow the
steam to clear before reaching into the unit. Use the lifting handle to retrieve
smaller bottles. WARNING: Always test temperature before feeding!
11. Carefully empty liquid from the collection area of the basket riser.
Use caution: Contents will be hot!
Collection Area
Volume Amount
Units
7. Select the vessel material type. Each button press toggles options.
Plastic Bottle
Glass Bottle
8. Select the volume amount in the vessel. Use the UP or DOWN Arrow button to
adjust between 2oz (60ml) and 11oz (325ml).
NOTE: Warming times may vary from the time chart when using a silicone sleeve
(not included). Always test the temperature of the contents before feeding!
Start Condition
Timer Display
6. Select the start temperature condition of the vessel. Each button press toggles the 3 options.
Room Temperature
Refrigerator Frozen
Manual Time Adjustment: While in the temperature condition mode, use the UP
and DOWN buttons to change the timer setting. NOTE: The last used warming time
is remembered for your next use.
