16
Pumping with a Single Milk Collection Kit:
Remove the unneeded hose from the port on the front of the pump. Place the port cover in the empty port.
Vacuum strength will intensify when switching from two to one port. Adjust vacuum levels to your preferred
comfort level.
Placement of the Milk Collection Kit:
Position the SoftShape™ Silicone Shield over your breast, centering the nipple in the neck of the shield.
Your nipple should not touch or rub on the side walls of the shield. Check nipple positioning again once
the pump is operating, to ensure that it remains away from the sides. If not, pause pump and try
repositioning. Your breast should completely fill the SoftShape™ Silicone Shield so that a seal may form to
achieve proper vacuum levels.
While you may feel some discomfort when first pumping, it should not cause pain. Adjust the cycle and
vacuum levels to lower settings to achieve your preferred comfort level and milk flow.
Using the Pump
