Digistat +2/+2RF Quick Start Guide
The Digistat +2/+2RF thermostat is a programmable thermostat with 24 Hour timing and 6
time/temperature events during the day.
Clock Setting
Your Digistat +2/+2RF is fitted with a “real-‐time clock”, which is “pre-‐set” at the factory, you will not
have to alter the time settings. A special feature of this real-‐time clock is it will automatically change
over during the GMT/BST summer/winter change over removing the need to manually alter the clock.
General Operation
Programmable thermostats do not have “On” and “Off” times like traditional timers. They offer
temperature control both day and night and you simply select which temperatures you require at
certain times of the day.
With the unit in “Auto-‐Mode” (the small arrow to bottom of screen will point to Auto) the temperature
can be changed for a short time by using the or buttons. Changing the temperature in this way
will keep the Digistat +2/+2RF set to your new temperature until the next pre-‐programmed event (at
which time it will revert to programmed temperature). The temperature you are setting will flash on the
screen. Once temperature is set, the unit will revert to showing the current temperature. The
indicator will show on the screen if the heating is turned on.
Programming the Digistat +2/+2RF
Your Digistat +2/+2RF comes with the following settings pre-‐programmed for your convenience:
EVERY DAY
Event
1
2
3
4
5
6
Time
6:30
8:30
12:00
14:00
16:30
22:30
Temperature
20.0
16.0
16.0
16.0
21.0
7.0
