3
2
2
.
.
P
P
a
a
n
n
e
e
l
l
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
LED
Status
Explanation
On (Red)
An alert for system failure due to overheating or wrong
voltage.
Monitor
Off
The device is in normal condition and running normally.
On (Green)
The switch finishes system booting and the system is ready.
Blinking (Green) The switch is powered on and starts system booting.
SYS
Off
The power is off or the system is not ready /
malfunctioning.
On (Green)
The device is powered on and running normally.
PWR
Off
The device is not ready or is failed.
On (Green)
The device is connected with 1000Mbps.
On (Amber)
The device is connected with 10/100Mbps.
Blinking
The system is sending or receiving data through the port.
Port 1 ~ 48
(GbE RJ45)
Off
The port is disconnected or the link is failed.
On (Green)
The device is connected with 1000Mbps.
On (Blue)
The device is connected with 10Gbps.
Port 49 ~ 54
(SFP+)
Blinking
The system is sending or receiving data through the port.
Interface
Description
RST
Restore the default settings.
Port 1 ~ 48
Port 1 to Port 48 can be used for Ethernet connection.
Port 49 ~ 54 (SFP+)
Port 49 to Port 54 are used for 10G/1000M fiber
connection.
Console
Used to perform telnet command control.
Power inlet for AC input (100~240V/AC, 50/60Hz).
Port 49 ~ 54 (SFP+)
Port 1 ~ 48 (GbE RJ45)