Draytek VigorSwitch G2500, Quick Start Manual, Page: 10 / 14

3
On (Green) The device is connected with 1000Mbps.
On
(Amber)
The device is connected with 10/100Mbps.
Blinking The system is sending or receiving data
through the port.
Port 45 ~ 48
(RJ45 or SFP)
Off The port is disconnected or the link is failed.
On (Green) The device is connected with 1000Mbps.
On
(Amber)
The device is connected with 10/100Mbps.
Blinking The system is sending or receiving data
through the port.
Port 49 ~ 50
(SFP)
Off The port is disconnected or the link is failed.
Interface Description
Port 1 ~ 44 (RJ45)
Port 1 ~ 44 (PoE)
Port 1 to Port 44 can be used for Ethernet
connection and PoE connection, depending on
the device connected
.
Port 45 ~ 48
(RJ45 or SFP)
Port 45 to Port 48 are used either for Ethernet
or fiber connection.
Port 49 ~ 50 (SFP)
Port 49 to Port 50 are used for fiber
connection.
Slide Switch
(for P2500 only)
Switch the LED function.
Right: PoE connection status.
Left: LAN port connection status.
Console
Used to perform telnet command control.
Power inlet for AC input (100~240V/AC,
50/60Hz).
Note
The following limitation is suitable for VigorSwitch P2500
Power Output --

IEEE 802.3af Max. 15.4W Output Supported

IEEE 802.3at Max. 30W Output Supported
PoE Power Budget –-

405 Watts (Max)