Draytek VigorAP 918R Series, Quick Start Manual

Page: 8 / 20

2
2
.
.
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
s
s
o
o
f
f
C
C
o
o
m
m
p
p
o
o
n
n
e
e
n
n
t
t
s
s
AP918R AP918RPD
LED Status Explanation
Off The system is not ready or has failed. ACT
Blinking The system is ready.
On Wireless function is ready.
Off Wireless function is not ready.
2.4G / 5G
Blinking Data is being transmitted (sending/receiving).
5G Signal (For D
Model)
The signal strength (excellent) > -50dBm.
5G Signal (For D
Model) The signal strength (good) is between -66dBm ~
-51dBm.
5G Signal (For D
Model) The signal strength (fair) is between -73dBm~
-67dBm.
5G Signal (For D
Model)
No signal or the signal strength is <-73dBm.
Interface Description
Factory Reset Restore the default settings. Usage: Switch on the access
point. Press and hold reset button for at least 10 seconds.
The router will restart with the factory default
configuration.
Before pressing the button, the cover should first be
removed by rotating it with a torque of 13 kgf-cm. After
the access point has been reset, replace the cover and
lock it with the same amount of torque.
PoE In Connector for receiving power from another device.
PoE Out
(For D Model) Connector for supplying power to another device.
Note For the sake of safety, keep the access point away from
children.
2