VigorAccess User Installation Guide
66
Note:
Please refer to the Command Line Interface manual for getting more commands IP
DSLAM supports.
4.6. Wizard Commands
In addition to the primitive commands described as above. Several wizard commands
are provided which is used easily. Type 'wizard' to see the command syntax.
$ wizard
<List of Wizard Commands>
----------------------------------------------------------------------------
dsl show [fast]
alarm show
pvc show
pvc create <dsl: 1~24> <vc: 1~8> <vpi> <vci> [<llcmux|vcmux>]
[<interleaved|fast>]
pvc delete <dsl: 1~24> <vc: 1~8>
bridge delete <bridge id: 1~193>
tca show <acked>
critical show <acked>
firmware upgrade [-]<source file> <CP|DP|FD|DSL> <server ip>
fd show
port <disable|enable|restart> <dsl: 1~24>
config backup <filename> <server ip>
config restore <filename> <server ip>
----------------------------------------------------------------------------
Use 'dsl show [fast]' to display all the 24 ports DSL status.
Use 'firmware upgrade' in an atomic and safer fashion to upgrade firmware without
removing the existing one in advance.
Use 'config backup/restore' to backup or restore the current configuration.