4
LED Indicators
Descriptions
Descriptions
Back Panels
ACT
(Activity)
Blink when power is supplied to the router and the router is running normally.
P1, P2,
P3, P4
PWR
Printer
USB socket to connect a printer with USB interface.
Only the power adapter comes with the package can be connected to the PWR.
These switch ports should be connected to your local PCs.
P1, P2, P3, P4
The restore default settings : While the router is running (ACT LED blinking),
press the button and hold for more than five seconds. The ACT LED begins to
blink rapidly, then release the button. The router will restart with the factory
default configuration.
Factory Reset
LAN
These indicators are dual-colour LEDs:
- OFF indicates that no device is connected to the LAN port.
- Yellow means the port is connected to a 10Mbps device.
- Green indicates to connected device is 100Mbps.
- BLINKING indicates that Ethernet packets are passing through the port.
To connect analog phone.
ADSL
To connect to the ADSL-enabled telephone line.
ON when the QoS function is active.
QoS
V1, V2
Printer
ON when the USB interface printer is ready
VPN
ON when the wireless LAN is ready.
ON when the VPN is active.
ADSL
LINE
DATA
ON when the ADSL network is show time.
Blinking indicates the DSL protocols start hankshaking.
The light will remain still when data transmission is available.
Vigor2600G
WLAN
