Vigor3100 Series User’s Guide
19
To choose
MPoA
as the accessing protocol of the internet, please select
MPoA
from the
Internet Access
menu. The following web page will be shown.
MPoA(RFC1483/2684)
Click
Enable
for activating this function. If you click
Disable
, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are vital for
building DSL connection to your ISP.
Multi-PVC channel
- The selections displayed here are determined
by the page of
Internet Access
–
Multi PVCs
.
Select M-PVCs
Channel
means no selection will be chosen.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
Bridge Mode
If you choose
Bridged IP
as the protocol, you can check this box to
invoke the function.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically.
Router Name
– Type in the router name provided by ISP.
Domain Name
– Type in the domain name that you have assigned.
WAN IP Alias
- If you have multiple public IP addresses and would
like to utilize them on the WAN interface, please use WAN IP Alias.
Summary of Contents for Vigor 3100 Series
