background image

 

Vigor2760 Series Quick Start Guide

 

i

Copyright Information 

Copyright 
Declarations 

 

Copyright© 2014 All rights reserved. This publication contains information that 
is protected by copyright. No part may be reproduced, transmitted, transcribed, 
stored in a retrieval system, or translated into any language without written 
permission from the copyright holders. 

Trademarks 

 

The following trademarks are used in this document:   

 

Microsoft & Windows are a registered trademarks of Microsoft Corp. 

 

Apple, iOS and Mac OS are registered trademarks of Apple Inc. 

 

Other products may be trademarks of their respective manufacturers. 
 

Safety Instructions, Warranty & Updates 

Safety Instructions 

 

 

Read the installation guide thoroughly before you set up the router. 

 

The router is a complicated electronic unit that may be repaired only be 
authorized personnel. Do not try to open or repair the router yourself. 

 

Do not place the router in a damp or humid place, e.g. a bathroom. 

 

Do not stack the router or obstruct its ventilation.. 

 

The router should be used within a temperature range of +5 to +40C and 
not exposed to heat sources or direct sunlight. 

 

Do not run any LAN cables outdoors or to external buildings. 

 

Keep the packaging out of reach of children. 

 

When you want to dispose of the router, please follow local regulations 
on conservation of the environment. 

Warranty 

 

We warrant to the original end user (purchaser) that the router will be free 
from any defects in workmanship or materials for a period of two (2) years 
from the date of purchase from the dealer. Please keep your purchase receipt 
safely as proof of purchase. During the warranty period, and upon proof of 
purchase, should the product have indications of failure due to faulty 
workmanship and/or materials, we will, at our discretion, repair or replace the 
defective products or components, without charge for either parts or labour, to 
whatever extent we deem necessary to re-store the product to proper operating 
condition. Any replacement will consist of a new or re-manufactured 
functionally equivalent product of equal value, and will be offered solely at 
our discretion. This warranty will not apply if the product is modified, 
misused, tampered with, damaged by an act of God, or subjected to 
abnormal/unapproved working conditions. The warranty does not cover the 
bundled or licensed software of other vendors. Defects which do not 
significantly affect the usability of the product will not be covered by the 
warranty. We reserve the right to revise the manual and online documentation 
and to make changes from time to time in the contents hereof without 
obligation to notify any person of such revision or changes. Warranty service 
is ‘RTB’ (return to base), not advance replacement or on-site and in all cases 
provided through the distribution chain through which the product was 
supplied and only to the intended locale. You can subscribe to VigorCare 
within 30 days of purchase – see www.draytek.co.uk/vigorcare 

Join the UK 
mailing list 

Users in the UK & Ireland can sign up to our mailing list which goes out 4-6 
times per year with products news, updates, hints & tips and offers. For 
details, please visit www.draytek.co.uk/mailing-list 

Firmware & Tools 
Updates 

Due to the continuous evolution of DrayTek technology and emerging risks, 
router firmware updates may be issued. Please consult the DrayTek web site 
for more information on newest firmware, tools and documents. 

www.draytekco.uk    (For users and products in the UK/Ireland) 

 

Summary of Contents for Vigor 2760n
































Reviews: