background image

 

 

 

 

Vigor2765/2766 Series

 

VDSL2/G.fast Security Router

 

Quick Start Guide

 

(Wired models) 

 

 

 

Guide Version: 1

.3

 

Region: United Kingdom & Ireland

 

For updates and support, visit www.draytek.co.uk 

August 2021 / Firmware V4.2.3_BT

 

 
 
 
 
 

Note: Product specification is subject to continuous evolution which may 

not always be reflected in current documentation. For the formal specification 

and details of the supported features of your product, please refer   

only to the web site at 

www.draytek.co.uk

 

 
 
 

Regional and Network Compatibility

 

For all models, please check that you have been supplied with a device intended for your geographic region and networks. 
Hardware and software varies by region, as well as local support and warranty services.    To be sure of compatibility and local 
support, ensure that you are buying the correct product through authorized channels.    The outside of the product’s box will 
state the region compatibility (e.g. “Applied Region: UK”). If you are unsure, check with DrayTek or your supplier. The use of 

unofficial components (e.g. PSUs) or adapting interfaces or the use of unauthorized software/firmware may cause malfunction, 
product damage or personal danger and invalidates your warranty and access to support services.

 

 

Summary of Contents for 2ABB012F EU





























Reviews: