manualshive.com logo in svg

Draper VC300, Instructions Manual

Share
Download
Draper VC300 Instructions Manual Download Page 1

VACUUM CLEANER

■

STOCK No.59333                              

■

PART No.VC300

01/2000

• INSTRUCTIONS •

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE

THE SAFE AND EFFECTIVE USE OF THIS TOOL.

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the
machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct
and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to the
machine, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure both
machine and operator safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the machine.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous
improvement determines the right to make modifications without prior warning.

Summary of Contents for VC300













Reviews:

No comments

Brands by name

Popular brands

Load more brands