13
8. OPERATION AND USE
8.3 SPRAY REGULATION - FIG. 3
Rotate the pressure adjustment knob
clockwise to reduce the output or
anti-clockwise to increase the output.
Set up the required volume by testing the
spray on a small area of the workpiece or a
scrap piece of timber.
8.4 NOZZLE CHANGING - FIG. 4
THE COMPLETE ASSEMBLY:
Unscrew the nozzle
and replace with
other nozzle supplied
not shown.
8.5 THE ADJUSTABLE NOZZLE
- FIG. 5
With the nozzle removed, screw on the
adjustable nozzle head
.
Note: Ensure that the small valve does not
fall out while the nozzle is removed.
The adjustable nozzle should be used to
spray floors and ceilings. It can also be
used in areas with limited access.
Always hold the machine level when using
this nozzle.
Nozzle can be adjusted by using hand
pressure only to bend into desired
position.
NB: If ambient temperature is cold, place
nozzle in warm water for a few minutes,
this will enable easier bending.
FIG.3
FIG.4
FIG.5
Summary of Contents for StormForce SG80SF
Page 19: ...NOTES 19 ...
