FIG.1
FIG.2
FIG.3
FIG.4
drapertools.com
RDKC0316
3. ASSEMBLY
AND
USE
4.1 FOLD DOWN STAND - FIG. 1
When the gun is not in use and being stored, the stand (1) can be
folded out of the way. During operation the stand must be folded
down to allow safe positioning between glueing.
4.2 OPERATION - FIG. 2
Plug into wall socket and Insert the glue stick into the gun through the
feeder tube (2). Then allow glue gun to heat up (5 mins approx).
To further load the stick into the gun, squeeze the trigger several
times.
Apply glue to one of the two materials and press together within
15-20 seconds. The glue will set hard in approximately 1minute. When
the glue stick has been used, a second stick will have to be used to
push out the remains of the previous stick.
4.3 TRIGGER - FIG. 3
To start the flow of hot glue, squeeze trigger (3).
The trigger may require several operations initially to begin flow. The
glue sticks must be allowed to heat fully to flow properly.
4.4 VARIABLE HEAT CONTROL - FIG. 4
Use the thumb dial to control the heat output of this glue gun. At its
lowest temperature setting (150°C approx.) the glue will flow slowly
thus allowing for intricate and delicate work (lace or cloth etc.). At its
highest temperature setting, the glue will flow faster allowing for
more demanding glueing applications.
WARNING: If hot glue comes into contact with skin, a serious burn may
occur.
Run burn under cold water for several minutes and seek medical
attention if required.
Residual glue in the chamber of this glue gun may result in dripping.
Ensure that work surface is suitably protected from dripping glue.
Avoid contact with the hot nozzle.
5. DISPOSAL
5.1 DISPOSAL
- At the end of the machine’s working life, or
when it can no longer be repaired, ensure that it
is disposed of according to national regulations.
- Contact your local authority for details of
collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with domestic
waste.
• Do not incinerate.
• Do not abandon in the environment.
• Do not dispose of WEEE*
as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
e 18/05/2016 AN.
ged to 400g