Initial Screen
If the touch screen is blank, the screen has gone into sleep mode. Touch
anywhere on the screen to bring up the initial screen.
Touch anywhere on the screen to progress to the Password entry screen.
Password Screen
Enter four-digit password by touching the appropriate numerals, then
pressing the “ENT” button in the bottom right. As new digits are entered a
star will appear at top right of the screen directly beside the phrase ‘Enter
Password”
If user mistakenly presses an incorrect numeral they can press the “CLR”
button and start over.
Incorrect Password Screen
This screen appears only if user enters an incorrect password.
User should press “Try Again” or “Exit”.
Operation Selection Screen
This screen appears only after the user has entered the correct password.
The user then should make the appropriate selection for the function they wish to
perform.
Backstop Selection Screen
This screen appears when the user selects “Backstops” on the Operation Selection
Screen. The user should select the backstop they want to operate.
Backstop Operation Screen
This screen appears after the user selects the backstop they want to operate. Press
the appropriate button for the direction you want to run the backstop.
Please Note:
For safety reasons, all directional buttons are momentary contact.
The user will need to touch the button for the full run cycle. When the button is
released, motion will stop. Directional devices should be equipped with limit
switches that, when properly set, will stop the motion at the appropriate point,
so the user should keep the button pressed until motion stops by itself.
page 2 of 4
Smart Gym with
503338 4.3" Text Touch Screen
