Scissor Lift SLX by Draper
page
7
of 7
www.draperinc.com
(765) 987-7999
Installing Optional Environmental Air Space Housing
The Environmental Air Space Housing is shipped in pieces, and must be
assembled by the installer. The height of the Environmental Air Space Hous-
ing can be adjusted by moving the screws to different mounting holes in side
panels. Aluminum tape (not provided) can be used to cover unused holes. It is
recommended that an access panel be installed in the ceiling to allow future
access. The optional Environmental Air Space Housing must be installed per
Caution: Be careful when handling Environmental Air Space
Housing Panels. The panels could have sharp edges.
11
11
11
11
11
11
11
7
11
1
3
5
9
3
9
10
2
4
6
3
4
3
8
5
Front/Back
Side
Item Qty Part Number
Description
1
1
C028.544.02SA
Frame, SLX Plenum
2
1
C028.545.07SA
Frame, SLX Trim Ring
3
4
C044.178SA
Panel, SLX Plenum Side
4
4
C044.180SA
Panel, SLX Plenum End
5
2
C044.179SA
Panel, SLX Middle End
6
2
C044.177SA
Panel, SLX Plenum Middle Side
7
1
C095.123SA
Cover, SLX Plenum
8
28
C020.325
Screw, 8-32 x
3
/
8
" Type 1 HWH
9
40
C018.051
Nut #8-32 Zinc Hex KEPS
10
12
C013.070 Washer, .188 I.D. x .5 O.D. x .07" TK Nylon Flat
11
24
C020.112
Screw, 8-32 x
3
/
8
" Type F HWH
Do not use
electrical knockouts
on bottom sections
instructions to isolate the lift from the “other space used for environmental air.”
Includes trim ring for ceiling opening.
1
Attach Environmental Air Space Housing top frame to top of Scissor Lift
SLX with bolts provided.
2
Install top panel to Environmental Air Space Housing frame.
3
Attach assembly to overhead structure. Allow clearance between Environ-
mental Air Space Housing top and structure for ease of future access.
4
Install side and end panels, and trim frame.