Draper PWP52 Instructions For Use Manual Download Page 4

1. TITLE 

PAGE

1.1 INTRODUCTION:

USER MANUAL FOR:

PETROL WATER PUMPS

Stock no. 64065, 24580.
Part no. PWP52, PWP81.

1.2 REVISIONS: 

As our user manuals are continually updated, users should make sure that they use the very 
latest version.

Downloads are available from: http://www.drapertools.com/b2c/b2cmanuals.pgm

DRAPER TOOLS LIMITED  

WEBSITE: 

drapertools.com

HURSLEY ROAD 

PRODUCT HELPLINE: 

+44 (0) 23 8049 4344

CHANDLER’S FORD  

GENERAL FAX: 

+44 (0) 23 8026 0784

EASTLEIGH

HAMPSHIRE

SO53 1YF

UK

1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:

 WARNING!

  

Information that draws attention to the risk of injury or death.

 CAUTION!

  

Information that draws attention to the risk of damage to the product or  

  

 surroundings.

 
 NOTE!

  

Important information.

1.4 COPYRIGHT © NOTICE:

Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal & educational use only. 
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other 
form or means without written permission from Draper Tools Limited.

In all cases this copyright notice must remain intact.

Date first published December 2016.

NOTES

NOTES

3. GUARANTEE

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be 
free from defective materials and workmanship for a period of 12 months from the date of 
purchase except where tools are hired out when the guarantee period is ninety days from the 
date of purchase.

A proof of purchase must be provided with the tool.

Should the machine develop any fault, please return the complete tool to your nearest authorized 
warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, 
SO53 1YF. England. Telephone Sales Desk: (023) 8049 4333 or Product Helpline (023) 8049 4344.

If upon inspection it is found that the fault occurring is due to defective materials or 
workmanship, repairs will be carried out free of charge. This guarantee does not apply to normal 
wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, 
alterations, accident, or repairs attempted or made by any personnel other than the authorised 
Draper warranty repair agent.

NOTE: If the tool is found not to be within the terms of warranty, repairs and carriage charges 
will be quoted and made accordingly.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its 
terms are not authorised.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or 
invoice to verify your proof of purchase within the 12 month period.

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited

                

4

25

27

Summary of Contents for PWP52





























Reviews: