Draper LVC-S Brochure Download Page 5

Page: 5 / 40

• Single-Station Control–

All DRAPER

motorized screens, except SALARA/PLUG &
PLAY™ and BARONET, come with one single-
station control—the SS-1R: a 0v-20V AC,
3-position switch. Complete with stainless steel
cover plate; white optional. Popular options
listed below. UL listed.

• Multiple-Station Controls–

Can be used

with either 5V or low voltage. Identical in
appearance to the SS-1R (above), but prevents
two signals from reaching the motor at the same
time. UL listed.

• Locking Switch Cover Plate–

Can be

used with either 5V or low voltage. 3-position
switch with hinged key-locking coverplate.
Maintained action. UL listed.

• Video Interface Control—

Automatically

trigger screen with video projector or projector
lift. Model vic5 integrates screen with
equipment using a 5V switched outlet. Models
VIC2 & VIC6 for equipment with a 2v
switched outlet. The VIC-5, VIC-2, & VIC-
6 may be purchased with an override switch
(VIC-OS), permitting independent operation.
A VIC is not compatible with any other control
switch, LVC-III, or MC-, except for the VIC
override switch. UL listed.

• External Low

Voltage Controls

—

Compatible with master
control systems. Optional
3-button wall switch, key
control switch, or wireless
IR or RF transmitter available. UL listed.

• MC1—

Low voltage

controller that
accepts 2-way serial
communication.
Compatible with master
control systems, 3-button
wall switch, or wireless
IR or RF transmitter.
The LS00 Internet
Protocol Device allows
the connection of
Ethernet devices, such as
network and control systems to the MC.

FOLLOWING

INPUT

DEVICES

ARE

COMPATIBLE

WITH

RAPER

’

XTERNAL

LVC-III & MC-1

• Low Voltage Wall Switch—

Dry contact,

3-button, to raise or lower screen. Momentary
action.

• Key Control Switch—

3-position key

controlled switch. Available for both 5V and
low voltage. When used alone a maintained
contact switch is provided. With LVC-III a
momentary contact switch is provided. Also can
be used with motor with built-in low voltage.
UL listed.

• Key Operated Power Supply Switch—

the KS- power supply switch mounts next to the
operating switch and controls power to it. Low
voltage or 5V. UL listed.

• Wireless IR Remote Control—

3-button

operation for instant access to “up”, “down”,
and “stop” functions. Fully compatible with
“learnable” IR master control systems. Receiver
plugs into the Draper low-voltage control unit,
and must be ordered with the IRT/R.

• Wireless RF Remote Control—

3-button control lets you

change direction or adjust format at any point. The RF receiver plugs
into the Draper low-voltage control unit, and must be ordered with
the WRT/R.

For use with standard and quiet motors. Operate DRAPER motorized projection screens with a wall switch, infrared or radio frequency wireless remote

control, or any third-party control system. Found on our web site, DRAPER submittals let you specify which control options you need. To help choose

the right control options, our Controls Planning Sheet is available on the Internet at:

www.draperinc.com/go/

RAPER

ControlsPlanSheet.htm

SS-1R

SP-KPS-1

LVC-S