Please Note:
ALWAYS START AT THE IDLER END OF SHADE.
Please Note:
This shade must be mounted to wall or ceiling. No jamb mounting option available.
1.
Lift idler end of the fabric/
roller assembly into place and
align between the brackets.
2.
Depress spring-loaded
end of shade and insert it
into hole in Idler Bracket.
3.
Feed cable
through hole
in bracket.
4.
Hook Motor Plate
into hole on the
Motor Bracket.
6.
Ensure that Bracket Cover
SNAPS into place.
(Idler Bracket shown.)
SNAP
!
5.
Slide Bracket Covers
over brackets.
Please Note:
If cable does not fit
through cutout, drill a hole near
the bracket in a hidden location.
Section 2 -
Mounting Shade
page 4 of 8
Motorized FlexStyle
TM
