Draper FlexShade 2 Pocket Headbox Instructions Manual Download Page 1

Page: 1 / 8

Overview -

Components

Contents

Overview -

Components .......................................................................................1

PLEASE READ -

Important Installation and Safety Information ....................2

PLEASE READ -

Field Adjustments, Cleaning and Maintenance ...................2

Section 1 -

Mounting Shade ................................................................................3

Section 2 -

Removing/Replacing Roller ............................................................4

Section 3 -

Replacing Shade/Motor Assembly ................................................4

Section 4 -

Bottom Closure Removal/Replacement .......................................5

Section 5 -

Operation............................................................................................5

Section 6 -

Electrical Connections .....................................................................6

Section 9 -

Dimensions ........................................................................................8

CAUTION

Read and understand all warnings

before beginning installation.

Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385

draperinc.com | 765.987.7999 | 800.238.7999

FORM: FS_MO_FS2_PHB_Inst21

FlexShade

2 Pocket Headbox

Maximized coverage for large, tall areas, while also reducing light gap

INSTRUCTIONS

INSTALLATION & OPERATION

If you have any difficulties installing or servicing your

FlexShade 2, call your dealer or Draper, Inc.

PERSONNEL REQUIRED

POWER DRILL

PENCIL

TAPE MEASURE

HARDWARE

(by others)

LEVEL

PLIERS

TOOLS REQUIRED

Summary of Contents for FlexShade 2 Pocket Headbox









Search results

Summary of Contents for FlexShade 2 Pocket Headbox

Reviews:

Related manuals for FlexShade 2 Pocket Headbox

Brands by name

Popular brands

Draper FlexShade 2 Pocket Headbox, Instructions Manual

Search results

Summary of Contents for FlexShade 2 Pocket Headbox

Reviews:

Related manuals for FlexShade 2 Pocket Headbox

Brands by name

Popular brands