- 12 -
9. OPERATION AND USE
FIG.13
FIG.14
FIG.15
FIG.16
9.1 FILLING THE SPRAY BOTTLE –
FIGS. 13 – 15
– Unscrew the pump handle
anti-clockwise
to loosen and remove from the pump
handle/assembly from the fill inlet
.
– Fill the spray bottle with your chosen liquid
to the desired level through the fill inlet
.
Note:
Whilst the fill inlet incorporates a flanged
rim to help avoid spillages, the additional use of
a large funnel
+
may be adviseable,
especially when using potentially hazardous
liquids.
– Replace the pump handle/assembly and
screw anti-clockwise to close.
9.2 PRESSURISATION – FIG. 16
Working spraying pressure is achieved by
pumping the handle
approximately 30 times.
Note:
Try to avoid overfill with either air or
liquid. Air will bleed from the safety pressure
valve if the pressure exceeds 2.5bar. (see the
following section for more information).
+
×30
