manualshive.com logo in svg

Draper 80880, Manual

Share
Download
Draper 80880 Manual Download Page 1

Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF.  U.K.

Helpline: (023) 8049 4344

Sales Desk: (023) 8049 4333

Internet: drapertools.com

E-mail: [email protected]

General Enquiries: (023) 8026 6355

Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the 
Draper Tools Helpline for details of an agent in your local area.

©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, 
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

These instructions accompanying the product are the original instructions. This document is part of the product, 
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these 
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been 
designed, and contains all the necessary information to ensure its correct and safe use. By following all the 
general safety instructions contained in this manual, it will ensure both product and operator safety, together 
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the 
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper 
Tools policy of continuous improvement determines the right to make modifications without prior warning.

80880

CONTACTS

YOUR DRAPER STOCKIST

KCKC0917

PETROL

BRUSH CUTTER

Summary of Contents for 80880

























Reviews:

No comments

Brands by name

Popular brands

Load more brands