5. HEALTH AND SAFETY INFORMATION
- 7 -
✘
✓
5.1 SAFETY PRECAUTIONS
1. The vehicle to be lifted should never exceed the rated capacity of the life.
2. The lift should be supported on a solid, level and horizontal surface which is well illuminated
and free of obstructions. Never stand the lift on a surface which may sink.
4. Ensure that there are no persons inside the vehicle to be lifted. Switch off the engine and
apply the brake. If the vehicle has automatic stop/start or is electric only - ensure the vehicle
key is a safe distance from the vehicle to prevent it activating by mistake. Ensure the vehicle
or element to be lifted is safe against any type of sliding. Use chocks if appropriate (1). Do not
enter the vehicle or start the engine whilst it is supported on the lift or appropriate stands. The
lift is a lifting device only and should never be used to move the vehicle.
5. When using the body lift plate, position the lift under the manufacturer’s recommended lifting
point for the vehicle and ensure that it is not corroded, dirty or greasy.
6. During raising and lowering of the load, all precautions should be taken to avoid movement of
the vehicle load.
7. The lift should be positioned so as to avoid the need for the user to introduce any part of
his/her body underneath the vehicle. Never work under a raised vehicle without supporting it
with axle stands (5) or other appropriate methods. Never position any part of your body near
the movable elements of the lift.
8. It is necessary for the operator to be able to observe the lifting device and the load during all
movements. In the presence of dangerous conditions, such as movement of the vehicle, etc,
the lifting process must be stopped immediately and not attempted until the vehicle is fully
secured for lifting.
9. Ensure that there are no persons or obstructions underneath the vehicle prior to lowering.
10. Always use the locking bar at the nearest locking position under the wheel cradle or body lift
plate when the vehicle is at the required height.
Caution:
•
Use only on a firm, level surface, concrete is required.
•
Do not exceed the rated capacity of this lift.
•
This is a lifting device only - do not work under the vehicle without proper support devices,
such as axle stands.
•
Make sure that the lifting point is stable and correctly centred on the lift saddle.
•
Familiarise yourself thoroughly with this manual before operating to prevent damage to the lift,
property, or personal injury.
5) Working
Under
The
Vehicle
It is extremely important, when working under the vehicle, to
ensure axle stands are always used.
