manualshive.com logo in svg

Draper 70548, User Manual

Share
Download
Draper 70548 User Manual Download Page 13

- 13 -

8.   OPERATION AND USE

8.3 BATTERY INFORMATION

Typical readings. 

 Engine
 Capacity

 <1300cc 

5 - 15Ah 

15 - 30Ah 

35 - 45Ah 

- 

60 - 110Ah

 >1300cc 

- 

- 

45 - 65Ah 

45 - 65Ah 

60 - 110Ah

 Diesel 

- 

- 

60 - 90Ah 

60 - 90Ah 

60 - 110Ah

8.4 CHARGING TIMES

The charging time depends on the batteries charge condition. A partially charged battery will take 
less time to charge than a fully discharged battery. The approximate charging time for a battery 
can be calculated using the following equation:-

 

 

 

Capacity in Ah (battery)

 Charging 

time/hours 

=

  

 

Charger 

output 

(Amps)

For example, a 45Ah battery would require approximately 11 hours to charge from a 4.2A battery 
charger.

The above table is to give an average charge time.
If the charger you are using is an automatic or smart charger then it will automatically turn off or 
revert to “float” charge status to maintain the battery in its fully charged state.

Summary of Contents for 70548

















Reviews:

No comments

Brands by name

Popular brands

Load more brands