8. OPERATION AND USE
8.2 CHARGING A BATTERY
With a battery removed from vehicle:
1.
Connect the RED positive charger lead
to the positive (+) terminal on your
battery.
2.
Connect the BLACK negative charger lead
to the negative (–) terminal on your
battery.
3.
Set the charger’s 6V/12V switch
to the correct voltage for the battery to be
charged.
4.
Plug in the mains power lead and set the charger’s on/off switch
to ‘on’.
Charging will now commence.
NOTE: Refer to the section titled “charging times” to determine the correct charging time
for your battery/charger combination.
With a battery connected to vehicle:
NOTE: All loads in the vehicle must be switched off during charging.
1.
Connect the RED positive charger lead
to the positive (+) terminal on your
battery.
2.
Connect the BLACK negative charger lead
to your vehicles ground connection
on either the engine or chassis, away from any fuel lines or the battery vents.
3.
Set the charger’s 6V/12V switch
to the correct voltage for the battery to be
charged.
4.
Plug in the mains power lead and set the charger’s on/off switch
to ‘on’.
Charging will now commence.
NOTE: Refer to the section titled “charging times” to determine the correct charging time
for your battery/charger combination.
- 12 -
After an extended period of charging the back of this machine can become warm.
This machine must be used on a non flammable surface.
