Draper 69339, Instruction Manual

Page: 6 / 12

– 6 –
6. ASSEMBLING THE
ARC WELDER
6.1 CONNECTION TO THE POWER
SUPPLY
Make sure the power supply information on the product’s
rating plate is compatible with the power supply you
intend to connect it to.
A suitable plug must be fitted by a qualified
electrician.
This product’s wiring has insulation stripped in
preparation for wiring a 16A plug (not supplied).
It is designed for connection to a 16 amp power supply
rated at 230V AC.
Because it is constructed mostly of metal parts, it is a
Class 1 machine; meaning, it must have an earth
connection in the power supply. This is to prevent
electrocution in the event of a failure.
Note: Remove the plug from the socket before carrying
out adjustment, servicing or maintenance.
Check that the electrical supply delivers the voltage and
frequency corresponding to the product and that it is
fitted with a delayed fuse suited to the maximum
delivered rated current.
Note: This product has been set to the highest voltage
at the factory.
7. SETTING THE ARC WELDER
7.1 RATING PLATE
IP21S
Unit’s
protection class
rating.
Do not
dispose of
WEEE* as
unsorted
municipal
waste.
ARC welder.
Read relevant
safety
documentation.
UK Conformity
Assessed.
Power supply
identifier, e.g.
socket with 3
poles.
European
conformity.
Denotes that
the unit has the
potential to be
used safely in
environments
subject to
electrical
discharges.
Secondary
no-load
voltage.
Warning!
U
1
=230V
Rated supply
voltage.
Transformer. †
Rated duty
cycle.
Fan cooled.
Welding
current
(AMPS)
Indoor use
only. Do not
expose to rain.
Welding
voltage
Class F
Insulation
rating.
Unit’s
maximum
absorbed
current
(AMPS).
† Symbols can be combined,
for example:
Denotes that this welder
produces an A.C welding
current.
Unit’s effective
absorbed
current (AMPS).
European
reference safety
standard.
* Waste Electrical & Electronic Equipment