background image

2. CONTENTS

10.  MAINTENANCE & TROUBLESHOOTING

 

  10.1  SPARK PLUG............................................................................................................. 21

 

  10.2  LUBRICATION INSTRUCTIONS ............................................................................... 21

 

  10.3 CLEANING ................................................................................................................. 21

 

  10.4  ENGINE AIR CLEANER............................................................................................. 21

 

  10.5  CLEAN AIR FILTER ................................................................................................... 21

 

  10.6  LUBRICATION INSTRUCTIONS ............................................................................... 22

 

  10.7  CUTTING BLADE....................................................................................................... 22

 

  10.8  CUTTING BLADE....................................................................................................... 22

 

  10.9  BLADE MOUNTING TORQUE................................................................................... 23

 

  10.10 FUEL AND LUBRICATION........................................................................................ 23

   10.11 

STORAGE INSTRUCTIONS (OFF SEASON) ......................................................23-24

11.  EXPLANATION OF SYMBOLS

 

  11.1  EXPLANATION OF SYMBOLS .................................................................................. 25

12. DISPOSAL

 

  12.1 DISPOSAL.................................................................................................................. 26

DECLARATION OF CONFORMITY

.............................................................................. ENCLOSED

11.  EXPLANATION OF SYMBOLS

11.1 EXPLANATION OF SYMBOLS

- 25 -

- 4 -

Read operator’s manual.

Pay more attention to the

operator’s hands and feet

to avoid injury.

Keep bystanders away.

Safety label found on lawn mower:
KEEP HANDS AND FEET AWAY.

Toxic fumes.

Don’t operate inside

house.

Caution: Engine hot.

When repairing, please 

remove the spark plug, 

then repair it according to 

operational manual.

Fuel is flammable, keep fire away.
Do not use this machine on

slopes greater than 16.7°.

When mowing, please 

wear the glasses and ear 

plugs to defend the 

operator himself.

Summary of Contents for 66171





























Reviews: