Draper 65673, Instructions Manual

Page: 7 / 12

- 6 -
OPERATION AND USE
WARNING: Diesel is carcinogenic, wear
protective clothing to avoid contact with skin.
Prior to pumping, ensure the transfer pump is on a
level stable surface, the filter is submerged in the
source tank and the filling gun is in the filler
nozzle of the vehicle. (Fig 5.)
Fig 5.
Fig 6.
SWITCH ON/OFF (FIG 6.)
Ensure the trigger on the filling gun is not in the
on position. Switch the transfer pump ‘on’ by
pulling knob
✪✌
upwards.
To switch the pump off, push knob
✪✌
downwards.
Note: The pump is self priming.
The maximum running time for 24V is 10 minutes.
take care not to flatten the battery on your vehicle.
✪✌
Fig 7.
PUMPING (FIG 7.)
To begin fluid transfer, insert the nozzle
✫✌
into
the desired aperture, pull back the trigger
✬✌
. It
is possible to lock the trigger back using lock
✭✌
. To do so pull trigger
✬✌
fully back, press
button
✭✌
, release trigger
✬✌
, release button
✭✌
. The fluid will continue transferring until the
trigger is pulled back fully, releasing the lock.
✬✌
✭✌
✫✌