Draper 65121, Instructions Manual

Page: 6 / 12

- 5-
UNPACKING AND CHECKING
CONTENTS
WARNING:
For your own safety, never connect the plug to the power supply until all the assembly steps have
been completed and you have read and understood the safety and operating instructions.
FIG.A
✕✌
Cordless drill.
✖✌
Battery charger adaptor and stand.
✗✌
Battery pack.
✘✌
Carry case.
✙✌
27 Piece accessory set
27 Piece accessory set contains:
3 x Double ended screwdriver bits
plain slot 5.0, 7.0mm
cross slot No.1, No.2
hexagon 4.0, 5.0mm
5 x Single ended screwdriver bits plain slot 5.0, 6.0mm
cross slot No.1, No.2
PZ-TYPE No.2
10 x HSS drill bits 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0mm
8 x Hexagon sockets 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0mm
1 x 1 ⁄
4
'' Square Drive x 1 ⁄
4
'' hexagon adaptor
PZ-TYPE screwdriver bits are compatible with *Pozi/Supadriv fixing systems.
*Pozi/Supadriv are registered trademarks of European Industrial Services Limited.
Carefully unpack the storage case and its contents from the carton. Place the storage box on a flat
level surface. Now open the lid by releasing the two catches which are located at the front of the
case. Referring to Fig.A. carefully check that all the parts are present.
If any parts are missing or damaged please contact the stockist where your purchase was made or
call the Draper Helpline on (023) 8049 4344.
✘✌
✖✌
✗✌
✙✌
✕✌
FIG.A