(2.) Pass power
cable through.
INSTRUCTIONS
Please read and understand these instructions before installation, keep them for future reference.
IF IN DOUBT PLEASE CONSULT A QUALIFIED ELECTRICIAN.
This product should not be tampered with or modified in any way; if this does occur the product
may become unsafe and the warranty will be invalid. This product is suitable for outdoor use.
SAFETY
Please make sure that the mains electricity is isolated (switched off) before you start the
installation or undertake any maintenance. It is recommended that the circuit fuse is removed to
prevent the electricity being accidentally switched on. This product contains glass, please take
care when handling or fitting.
FUSE VALUE
This light should be connected to a 5 Amp circuit. If the existing fuse in the circuit is higher than
5 Amps an inline fuse of 3 Amps should be fitted. This light should only be connected to a
220/240V 50Hz electricity supply in accordance with I.E.E. wiring safety regulations.
FIXING INSTRUCTIONS
1. Separate the backplate from the lamp by removing the two domed nuts on the front of the lamp.
Leave the two threaded bolts in the backing plate.
2. Place backing plate against the wall and mark position of the fixing holes (Fig.1. - 1).
(1.) Fixing holes
.
Fig.1.
INTERNAL VIEW OF BACK PLATE
- 3 -
