Draper 56791, Manual

Page: 5 / 20

3. WARRANTY
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Help Line (023) 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering labour is 12 months from
the date of purchase except where tools are hired out when the warranty period is 90 days from
the date of purchase. The warranty is extended to 24 months for parts only. This warranty does not
apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -
- 17 -
12. DISPOSAL
12.1 DISPOSAL
– At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
– Contact your local authority for details of collection schemes in your area.
In all circumstances:
● Do not dispose of power tools with domestic waste.
● Do not incinerate.
● Do not dispose of WEEE* as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
4. INTRODUCTION
4.1 SCOPE
As part of our core range, this product is suitable for enthusiasts and tradespeople alike.
As part of our core range, this product is suitable for enthusiasts and tradespeople alike. Any
application other than that it was intended for, is considered misuse.
4.2 SPECIFICATION
Stock No........................................................................................................................................56791
Part No. .............................................................................................................................CS1300D185
Motor:
Rated voltage .................................................................................................................. 230V~
Rated frequency ............................................................................................................... 50Hz
Rated input .................................................................................................................... 1300W
Saw blade:
Diameter................................................................................................................................185mm
Bore Ø.....................................................................................................................................16mm
Thickness ...............................................................................................................................2.4mm
Maximum depth of cut:
90°.......................................................................................................................................... 63mm
45°.......................................................................................................................................... 42mm
Revolutions per minute (no load): ......................................................................................... 4,500r/min
Sound pressure level (LpA)*: ................................................................................................ 95.5dB(A)
Sound power level (LWA)**: ................................................................................................ 106.5dB(A)
Uncertainty (K): .......................................................................................................................... 3dB(A)
Vibration level Main handle†: .............................................................................. 2.462m/s
2
, K=1.5m/s
2
Weight (machine only):.................................................................................................................. 4.4kg
†When sawing in wood.
* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to and declared
according to EN60745.
** The typical A-weighted noise level determined according to EN60745
4.3 HANDLING & STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in personal
injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best..
10. MAINTENANCE AND TROUBLESHOOTING
- 5 -
- 16 -
10.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your
tool in good working condition.
The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum
the ventilation slots regularly.
10.2 TROUBLESHOOTING
11. OPTIONAL ACCESSORIES
11.1 OPTIONAL ACCESSORIES
A full range of accessories are available from Draper Tools.
Please visit our website for details: www.drapertools.com
Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
3. Other.
2. Have brushes replaced by an
authorised service centre.
3. Contact an authorised service
centre.
Problem Cause Remedy
2. Brushes worn.
Machine does not
start.
1. Fuse. 1. Replace time delay fuse or
reset circuit breaker.
Poor cutting
performance.
1. Saw blade blunt. 1. Replace saw blade.
2. Saw blade incorrectly mounted. 2. Remove & refit saw blade as
per instructions.
3. Incorrect saw blade selection. 3. Seek advice on suitable saw
blades.
Saw vibrates. 1. Saw blade distorted. 1. Stop machine immediately &
replace blade.
2. Saw blade incorrectly mounted. 2. Stop machine immediately.
Remove & refit saw blade as
per instructions.