Draper 55742 User Manual Download Page 5

4. INTRODUCTION

4.1 SCOPE

This tool is intended for cutting curves and straight lines on sheet metal.

As part of our core range, this product is suitable for enthusiasts and tradespeople alike.

Any application other than that it was intended for, is considered misuse.

4.2 SPECIFICATION

Stock No........................................................................................................................................55742

Part No. ...............................................................................................................................D20NS1700

Rated voltage  ............................................................................................................................  20V

Speed (no load) ................................................................................................................. 1700spm

Maximum thickness of sheet ...................................................................................................1.2mm

Minimum cutting radius (freehand nibblers) ..........................................................................25mmØ

Sound pressure level (LpA)*:  .............................................................................................. 80.67dB(A)

Sound power level (LWA)**: ................................................................................................  91.67dB(A)

Uncertainty (K):  .......................................................................................................................... 3dB(A)

Vibration level when cutting metal†:................................................................. 11.16mm/s

2

, K=1.5m/s

2

Weight (machine only):.................................................................................................................. 2.7kg
*   Continuous A-Weighted Sound Pressure Level at the workstation in accordance to and declared  

  according to EN60745.

**   The typical A-weighted noise level determined according to EN60745.

4.3 HANDLING & STORAGE

–  Care must be taken when handling this product.

●  Dropping this power tool could have an effect on its accuracy and could also result in personal  

  injury. This product is not a toy and must be respected.

–  Environmental conditions can have a detrimental effect on this product if neglected. 

●  Exposure to damp air can gradually corrode components. 

●  If the product is unprotected from dust and debris, components will become clogged. 

●  If not cleaned and maintained correctly or regularly, the machine will not perform at its best.

- 5 -

Summary of Contents for 55742





















Reviews: