manualshive.com logo in svg

Draper 54044, Instruction Manual

Share
Download
Draper 54044 Instruction Manual Download Page 10

- 7 -

6. TECHNICAL DESCRIPTION

6.1 IDENTIFICATION

  Main pump body

 Support 

feet

 Outlet

 Power 

cable

 Impeller

 Power 

switch

  Battery terminal clamps

  Hose clamps x2

  Hose joining tube x1

  Length of hose (3M)

- 10 -

9. TROUBLESHOOTING

Pump fails to pump

1. Battery  flat.
2. Battery connection fault.
3. Debris jammed in impeller.

1. Re-charge  battery.
2. Re-check battery connections.
3. Check and extract any debris stuck 

in impeller.

Pump operates at a 
reduced flow rate

Problem

Cause

Remedy

1. Impeller aperture blocked jammed 

impeller.

1. Check and remove any debris 

obstructing the impeller aperture or 
impeller rotation.

1. Outlet hose detached from pump 

outlet aperture.

1. Check and re-attach hose to pump 

outlet pipe.

Pump turned on but 
no liquid coming from 
outlet pipe.

9.1 TROUBLESHOOTING

WARNING:

 For your safety always turn the main switch on the machine "off" and remove the 

battery clips from the power supply before carrying out any maintenance or trouble shooting.

Summary of Contents for 54044

















Reviews:

No comments

Brands by name

Popular brands

Load more brands